Toshiba B-SA4T Installation Procedure For Optional Equipment, Default, 9.9 9.9 sec, 0.0 0.0 sec

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Feb. 25, 2008)

8. RFID Module: B-SA704-RFID-U2-EU-R

Continued from the

previous page.

<10>RFID

R CYCLE TIM 4.0

[PAUSE]

<10>RFID

W CYCLE CNT 5

[PAUSE]

<10>RFID

W CYCLE TIM 2.0

[PAUSE]

Read retry timeout setting menu is displayed.

Set the timeout period during which RFID tag read retries are allowed, with the [FEED] or [RESTART] key. If the printer has retried for the max. number of times within the RFID read retry timeout, the printer stops the retries at the time.

Whenever the printer writes data onto an RFID tag, the tag is read first. The read retry timeout set by this parameter becomes also effective in this pre-read.

		9.9 (9.9
		sec.)
[RESTART]
		•
		•
		•
		4.0 (Default)
	[FEED]
		•
		•
		0 0 (0 0

Press the [PAUSE] key.

Max. number of write retries setting menu is displayed.

Set the maximum number of retries to write data onto an RFID tag.

The printer retries to write data onto an RFID tag for up to specified number of times. If the timeout period expired before the max. number of retries have been done, the printer

stops the retries at the time.

Set the max. number of times with the [FEED] or [RESTART] key.

		255
		•
[RESTART]
		•
		•
		5 (Default)
		•
	[FEED]
		•
		0

Press the [PAUSE] key.

Write retry timeout setting menu is displayed.

Set the timeout period during which RFID tag write retries are allowed, with the [FEED] or [RESTART] key.

If the printer has retried for the max. number of times within the RFID write retry timeout, the printer stops the retries at the time.

		9.9 (9.9 sec.)
		•
[RESTART]		•
		•
		2.0 (Default)
		•
	[FEED]
		•
		0.0 (0.0 sec.)

Press the [PAUSE] key.

Continued to the next page.

8- 13