Toshiba B-SA4T installation manual Connect the Interface Cable to CN4 on the Main PC Board

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Jan. 19, 2006)

7. Expansion I/O Board: B-SA704-IO-QM-R

4. Attach the Expansion I/O Board to the printer back with one of the supplied SMW-3x6 screws.

SMW-3ｘ6 Screw

Expansion I/O Board

5. Connect the Interface Cable to CN4 on the MAIN PC Board.

CN4 Connector

Expansion I/O Board

MAIN PC Board

Interface Cable

6. Attach the supplied Blind Plate to the printer back with the supplied two SMW-3x6 screws.

Blind Plate

SMW-3ｘ6 Screw

NOTE: The Blind Plate is not required to be attached when the optional Serial Interface Board is also installed.

Serial Interface Board

8.Attach the Side Panel, removed in Step 2, back to the printer.

7- 3