INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
(Revision Date: Feb. 25, 2008)
8. RFID Module:
•RFID Module Settings
After installing the RFID Module on the printer, configure the RFID module settings using the system mode on the printer.
Turn on the printer while holding down the [FEED] and [PAUSE] keys at the same time.
<1>DIAG. V1.6
[RESTART]
When “<1>DIAG. V1.6“ appears on the LCD, press the [RESTART] key.
<10>RFID
[PAUSE]
RFID setting menu ”<10>RFID” is displayed. Press the [PAUSE] key.
<10>RFID
READ TEST OFF
[PAUSE]
<10>RFID
CAREERSENSE OFF
[PAUSE]
<10>RFID
MODULE NONE
[PAUSE]
Continued to the next
page.
Read test menu is displayed. Choose whether to perform a read test or not with the [RESTART] or [FEED] key.
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| [RESTART] | READ TEST OFF | |||
|
|
|
|
|
| READ TEST ON |
|
|
| [FEED] |
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
OFF: |
| A read test is not performed. (Initially, choose “OFF”.) | ||||
ON: |
| A read test is performed. | ||||
|
| The printer enters the read test mode, and a read test is performed each time the | ||||
|
| [PAUSE] key is pressed. When the data of a tag can be read, it is displayed on the | ||||
|
| LCD. |
| |||
•Read data is displayed in hex. value on the
1234567890123456
6543210987654321
When the RFID tag contains 16 digits or more data, the first 16 digits are displayed. When data volume is less than 16 digits, the vacant digits will be filled with spaces.
•If the tag cannot be read, “RFID TIMEOUT” or “RFID READ ERROR” is displayed.
•If the type of the tag to be read and one selected by the RFID tag type selection do not match, an RFID tag read error will result.
Make sure the RFID tag type has been selected before the read test is started.
After choosing an option, press the [PAUSE] key.
Carrier sense setting menu is displayed. This menu is not available to the
Module type setting menu is displayed. Choose “U2” with the [FEED] or [RESTART] key.
U1: Not available. [RESTART] H1: not available.
NONE: No RFID Module is installed.
[FEED] U2:
H2: Not available.
Press the [PAUSE] key.
8- 11
