Magnadyne XV-DV424, XV-DV323, S-DV424 Additional information Chapter, Optional system settings

Additional information

Chapter 13

Additional information

13

English

Optional system settings

These settings are accessed by using the System Setup menu while in standby.

	FRONT
SURROUND				OPEN CLOSE
			8		0	BASS MODE		DIALOGUE		CH LEVEL
						SURROUND		ADVANCED		VIRTUAL SB
1			3	¡		PROGRAM		REPEAT		RANDOM
							AUDIO	SUBTITLE			ANGLE
4				4
			7				ZOOM	TOP MENU			HOME
											MENU
				RETURN			1		2		3
DVD MENU
							SYSTEM				QUIET/
							SETUP	TEST TONE		MIDNIGHT
			TUNE+				4		5		6
		ST–		ST+		DIMMER		DISPLAY			TIMER/
			ENTER								CLOCK
							7		8		9
	MUTE		TUNE–	SOUND			SR+	FOLDER–		FOLDER+
							CLR		0		ENTER
							MAIN	SUB		ROOM SETUP

MASTER

VOLUME

1Switch the system into standby.

2Press SYSTEM SETUP.

3 Use the (cursor left/right) buttons to choose the setting you want to adjust then press ENTER.

The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.

4 Use the (cursor up/down) buttons to adjust the setting.

5Repeat steps 2 and 3 to make other settings.

6Press ENTER to confirm.

System Setup menu options in standby

Below are all the available settings in the setup menu. The first setting in each section is the default. See also the notes in each section for additional information about the settings.

Child lock setting

The Child Lock feature is useful when you’ve set the wake-up timer and don’t want the system switched on before it activates.

•Lock On – Makes the front panel buttons and controls inoperative.

•Lock Off – Restores regular use of the front panel buttons and controls.

Clock format setting

Specifies how the clock is displayed:

•12-Hour– Sets the clock to show in 12- hour format in the display.

•24-Hour– Sets the clock to show in 24- hour format in the display.

TV attenuator setting

If the source connected to the TV analog input is producing distortion through the speakers, the attenuator will reduce the signal level.

•ATT 6dB – Reduces the signal level by 6dB.

•ATT 10dB – Reduces the signal level by 10dB.

•ATT Off – No attenuation

Line attenuator setting

If the source connected to the LINE analog input is distorting, the attenuator can reduce the signal level.

•ATT 6dB – Reduces the signal level by 6dB.

•ATT 10dB – Reduces the signal level by 10dB.

•ATT Off – No attenuation

Deutsch Français Italiano Nederlands Español

59

En