Magnadyne XV-DV323 Surround sound and other settings Chapter, Using the System Setup menu

09Surround sound and other settings

Chapter 9

Surround sound and other settings

Using the System Setup menu

All the available settings in the setup menu are listed in Surround and sound setup options and SR+ control options for Pioneer plasma displays below. See the notes in each section for additional information about the settings. Follow the steps below to customize the settings in the System Setup menu.

		FRONT
		SURROUND			OPEN CLOSE
				8	0			BASS MODE DIALOGUE		CH LEVEL
								SURROUND	ADVANCED	VIRTUAL SB
		1		3	¡			PROGRAM	REPEAT	RANDOM
								AUDIO	SUBTITLE		ANGLE
		4			4
				7				ZOOM	TOP MENU		HOME
											MENU
							1		2	3
		DVD MENU				RETURN		SYSTEM	TEST TONE		QUIET/
								SETUP		MIDNIGHT
				TUNE+			4		5	6
											TIMER/
			ST–		ST+			DIMMER	DISPLAY
				ENTER							CLOCK
							7		8	9
		MUTE		TUNE–		SOUND		SR+	FOLDER–	FOLDER+
								CLR	0		ENTER
								MAIN	SUB	ROOM SETUP
				MASTER
				VOLUME
1	Press SYSTEM SETUP.
2	Use the					(cursor left/right) buttons

to choose the setting you want to adjust.

The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.

3 Use the (cursor up/down) buttons to adjust the setting.

4Repeat steps 2 and 3 to make other settings.

5When you’re done, press ENTER to

leave the System Setup menu.

•You can't change the Surround and sound setup options with the Recording Mode (page 54) switched on.

Surround and sound setup options

The Room Setup feature (page 15) is designed to give you a basic surround sound setup, however you can make more detailed settings that may improve the surround sound in your listening room. Note that the first setting in each section is the default.

Front speakers distance setting

Specifies the distance from your listening position to the front speakers:

•Front 0.3 m ~ Front 9 m – Distance can be set in increments of 0.3 m. The default is 3 m.

Center speaker distance setting

Specifies the distance from your listening position to the center speaker:

•Center 0.3 m ~ Center 9 m – Distance can be set in increments of 0.3 m. The default is 3 m.

Surround speakers distance setting

Specifies the distance from your listening position to the surround speakers:

•Surr. 0.3 m ~ Surr. 9 m – Distance can be set in increments of 0.3 m. The default is 3 m.

Note

•The System Setup menu is exited automatically after 5 minutes of inactivity.

Dynamic Range Control

Specifies the amount of dynamic range adjustment to Dolby Digital or DTS soundtracks:

44

En