Magnadyne S-DV424, XV-DV323 Using this unit with a Pioneer, Plasma display, Scart pin assignment

Other connections 12

Switching the TV audio input from SCART to RCA

You can set the TV audio input to RCA or

SCART.

1Press TV.

2Press SYSTEM SETUP.

3	Use the	(cursor left/right) buttons
to select ‘TV Audio?’.
4	Press ENTER.
5	Use the	(cursor up/down) buttons
to select SCART or RCA.
6	Press ENTER

SCART pin assignment

The diagram below shows the SCART 21-pin connector assignment. This connector provides the video and audio signals for connection to a compatible color TV or monitor.

Pin	Assignment	Pin	Assignment
No.		No.
1	Audio R OUT	12	No
			connection
2	Audio R IN	13	GND (video)
3	Audio L OUT	14	GND (video)
4	GND (audio)	15	R or C OUT
5	GND (video)	16	BLANK OUT
6	Audio L IN	17	GND (video)
7	B OUT	18	GND (video)

Pin	Assignment	Pin	Assignment	English
No.		No.
8	Status	19	Video or Y
			OUT
9	GND (video)	20	No	Deutsch
	connection		connection
10	No	21	GND (video)
11	G OUT			Français
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG or (European				Italiano
connect it to this unit and take advantage of
model only) PDP-504HDE and PDP-434 HDE),
you can use an SR+ cable (see note below) to
various convenient features, such as
automatic video input switching of the plasma				Nederlands
display when the input is changed.
Media receiver
	CONTROL			Español
	OUT
		Pioneer plasma display
			XV-DV323/424
	IN
	CONTROL
	FM		AM
AV CONNECTOR ANTENNA UNBAL 75Ω			LOOP ANTENNA

The illustration above shows the European model.

57

En