Magnadyne XV-DV323, S-DV424 Using the Scart AV output, When TV format is set to Auto or Ntsc

12Other connections

Important

•If you connect a TV that is not compatible with a progressive scan signal and switch the system to progressive, you will not be able to see any picture at all. In this case,

press STANDBY/ON to put the system in standby, then press and hold the front panel (stop) button for about 8 seconds until the display shows Mem.Clr.?. Press the front panel VOLUME – (DOWN) or + (UP) button so that the display shows Interlace?. Press the front panel button to set to interlace and switch the system back on.

When TV format is set to AUTO or NTSC:

•When set to Progressive, PAL and NTSC discs are both output as progressive NTSC video. See also TV format setting on page 60

•When Component Out (above) is set to Progressive, there is no video output from the VIDEO and S-VIDEOjacks. If you want to display video on more than one monitor simultaneously, make sure that it is set to Interlace. See also TV format setting on page 60.

When TV format is set to PAL:

•Progressive cannot be selected. See also TV format setting on page 60.

Compatibility of this player with progressive-scan and high-definition TVs.

This player is compatible with progressive video Macro Vision System Copy Guard.

Consumers should note that not all high- definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the

connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.

This system is compatible with the following Pioneer displays and monitors: PDP-503HDG, PDP-504HDG, PDP-433HDG, PDP-434HDG.

Using the SCART AV output

European model only

There are two different kinds of video outputs you can use to connect this system to your TV. The SCART output should give you better picture quality than the standard composite video output. The SCART AV connector functions as both a video and audio output.

•Use a commercially available SCART cable to connect the AV CONNECTOR to your TV.

TV

		IN	IN	OUT		OPTICAL IN	IN
FRONT	CENTER	SURROUND			L	AUDIO
6	6	6				LINE 2	CONTROL		FM	AM
		L					AV CONNECTOR	ANTENNA
					R				UNBAL 75Ω	LOOP ANTENNA
		TV	AUDIO	LINE 1
		R				AC IN
6	6	6
						VIDEO
	SUB
	WOOFER					OUT

VIDEO

XV-DV323/424

Note

•SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/ monitor. You can find the pin assignments below.

56

En