Magnadyne S-DV323, XV-DV323, S-DV424 Using the timer Chapter, Setting the wake-up timer

08Using the timer

Chapter 8

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to switch on at any time and start playing whatever source you want.

Important

•The clock must be set to the correct time for the wake-up timer to work properly (see Setting the clock on page 14).

		STANDBY/ON
CD	FM/AM		L1/L2		TV CONTROL
DVD	TUNER TV		LINE
FRONT				CH	INPUT	VOL
SURROUND			OPEN CLOSE
		8	0
1		3	¡	BASS MODE DIALOGUE		CH LEVEL
				SURROUND	ADVANCED	VIRTUAL SB
4			4	PROGRAM	REPEAT	RANDOM
		7		AUDIO	SUBTITLE	ANGLE
DVD MENU			RETURN	ZOOM	TOP MENU	HOME
						MENU
				1	2	3
		TUNE+		SYSTEM	TEST TONE	QUIET/
	ST–		ST+	SETUP		MIDNIGHT
				4	5	6
		ENTER
						TIMER/
				DIMMER	DISPLAY	CLOCK
MUTE		TUNE–	SOUND	7	8	9
				SR+	FOLDER–	FOLDER+
				CLR	0	ENTER
		MASTER		MAIN	SUB	ROOM SETUP
		VOLUME

TV CONTROL

1Select the source you want played. For example, press TUNER (FM/AM on the front panel) to select the radio as your source.

2Prepare the source.

For example, tune in the radio station you want to wake up to.

3Set the volume.

4Press TIMER/CLOCK twice to reach the timer menu.

5	Use the	(cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
6	Use the	(cursor left/right) buttons

to select ‘TimerEdit’ then press ENTER.

7 Set the switch-on time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

8 Set the switch-off time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

After pressing ENTER this last time, the wake- up indicator lights, and the switch-on, switch- off times, the function (DVD/CD, etc.) and volume are confirmed in the display.

9Switch the system into standby mode. The wake-up timer will not work if the system is left on!

Tip

•You can check the timer settings in standby by pressing TIMER/CLOCK twice. (Press TIMER/CLOCK once to display the current time.)

Turning the wake-up timer on/off

If the wake-up timer is on, it will switch on the system everyday at the time you have set.

42

En