Magnadyne S-DV424, XV-DV323 Initial Settings menu Chapter, Using the Initial Settings menu

Initial Settings menu

Chapter 11

Initial Settings menu

11

English

Using the Initial Settings menu

The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1Press HOME MENU and select ‘Initial Settings’.

Initial Settings

2Use the cursor buttons and ENTER to select the setting and option you want to set.

All the settings and options are explained on the following pages.

Note

•In the table below, the default setting is shown in bold: other settings are shown in italics.

•Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.

•European model only – The AV Connector Out setting only needs to be set if you have connected this player to your TV using a SCART cable (See Using the SCART AV output on page 56).

Deutsch Français Italiano Nederlands

Video Output settings

Setting	Option	What it means
TV Screen	4:3 (Letter Box)	Set if you have a conventional 4:3 TV. Widescreen movies are
(See also Screen sizes		shown with black bars top and bottom.
and disc formats on
	4:3 (Pan & Scan)	Set if you have a conventional 4:3 TV. Widescreen movies are
page 68.)
		shown with the sides cropped so that the image fills the screen.
	16:9 (Wide)	Set if you have a widescreen TV.
AV Connector Out	Video	Standard video, compatible with all TVs.
European model only
	S-Video	Higher quality, but check your TV for compatibility.
(See also Using the
SCART AV output on
	RGB	Best quality, but check your TV for compatibility.
page 56.)

Español

49

En