Toshiba installation manual B-SA4TP Model, B-SA4TM Model

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Jan. 19, 2006)

6. Real Time Clock: B-SA704-RTC-QM-R

5.Pass the Interface Cable through the Cable Clamp, and between CN1 and CN2 on the MAIN PC Board, as shown in the pictures below. For the B-SA4TP model, wind the cable on the two Cable Clamps.

B-SA4TP Model	Connector CN2
MAIN PC Board

Interface Cable

B-SA4TM Model	Connector CN1	Cable Clamp	Interface Cable
	Connector CN2

MAIN PC Board

Interface Cable

Connector CN1 Cable Clamp Interface Cable

6.Connect the Interface Cable to CN501 on the MAIN PC Board.

CN501

Interface Cable

7.Attach the Side Panel, removed in Step 2, back to the printer. Interface Cable by the Side Panel.

MAIN PC Board

Care must be taken not to catch the

NOTE: When the B-SA704-IO-QM-R Expansion I/O Board or B-SA704-RS-QM-R Serial Interface Board was removed beforehand, re-install it.

6- 4