INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. 300 dpi Print Head Kit:
5. 300 dpi Print Head Kit: B-SA704-TPH3-QM-R
You will obtain the same print quality as the TS12 model (300 dpi) only by replacing the current print head with this optional kit.
The pictures used in this section are those of the
WARNING!
Do not touch the print head or its neighboring parts immediately after printing, or you may burn yourself.
CAUTION!
1.NEVER loosen or remove the following two screws of the Print Head as they have been fine adjusted before shipment. If they are loosened or removed, print quality may become deteriorated.
NEVER loosen or remove these screws.
2.Do not touch the Print Head Element when handling the Print Head.
•Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
300 dpi print head (1 pc.)
Installation Manual (1 copy)
5- 1