Installing I/O Cards
Installing I/O Cards
Introduction | These PathBuilder S24x, 26x, and 27x switch I/O cards are installed into slots 1 | ||
| through 8: |
| |
| • Serial Data Board (SDB) |
| |
| • | BRI |
|
| • | Hub |
|
| The Modem card can only be installed into slot 1. | ||
Installing an I/O |
| ||
Perform these steps to install any of the I/O cards: | |||
Card |
|
|
|
|
|
| |
| Step | Action | |
1Align the card and the appropriate slot.
2Insert the card, making the proper connection on the motherboard.
3Fasten each card with a single holding screw to the rear of the PathBuilder S24x, 26x, and 27x switch chassis.
PathBuilder S24x, 26x, and 27x Switch Hardware Installation |
