3Com S27x, S26x, S24x installation manual Ethernet Port 4 Limitations

Hardware Components

Ethernet Port 4 Limitations

Component	Description (continued)
DSPM with E&M	The PathBuilder S26x switch Analog DSPM/E&M card
Interface	allows the PathBuilder S26x switch to support up to two (2)
	voice/fax channels per card. Each E&M card occupies one
	ISA slot in the PathBuilder S26x switch. The PathBuilder
	S26x switch E&M card supports both two- and four-wire
	interfaces.

Consider these limitations when using the Ethernet Port 4:

• The port does not support Bridging (refer to the Bridging Option, Part No. T0008-16). When configuring this port, you are not prompted for the bridge link number.

•The port does not support SLAC.

•When configuring the Ethernet Port 4, you are not prompted for the connector type. Ethernet Port 4 only supports AUI.

1-10 About the PathBuilder S24x, 26x, and 27x switch