The PathBuilder S24x, 26x, and 27x Switch Rackmount Kit

The PathBuilder S24x, 26x, and 27x Switch Rackmount Kit

Introduction

You can install the PathBuilder S24x, 26x, and 27x switch in a standard Electronics

 

Industry Association (EIA) 19-inch equipment rack.

EIA Rackmount Kit The PathBuilder S24x, 26x, and 27x switch EIA Rackmount kit contains the following components:

One Mounting Shelf

Two adjustable Rear Mounting brackets for rear rail attachment

Four Phillips-head 10-32 x .38 long screws with integral lock washers

Eight Phillips-head 12-24 x.50 long screws for front and rear rail attachment

Three longer #6 screws

When Checking the Be aware of the following issues when checking the components of your rackmount EIA Rackmount Kit kit:

The Mounting Shelf and adjustable Rear Mounting brackets ship fastened together at the Mounting bracket’s front-most adjustment hole. This prevents damage during shipping. Disassemble these components prior to installation.

The four Phillips-head 10-32 x .38 long screws ship in holes securing the Mounting Shelf to the Rear Mounting brackets. Remove them to separate the shelf and brackets.

The eight Phillips-head 12-24 x .50 long screws ship in a small plastic bag.

Preparation and Unpacking

2-5

Page 61
Image 61
3Com S26x, S27x installation manual PathBuilder S24x, 26x, and 27x Switch Rackmount Kit