Configuring the PathBuilder S24x, 26x, and 27x Switch for DSU Operation

Configuring the PathBuilder S24x, 26x, and 27x Switch for DSU Operation

Configuration

Perform these steps from the CTP to configure the PathBuilder S24x, 26x, and 27x

 

Procedure

switch for DSU operation:

 

 

 

 

 

 

 

 

 

 

Step

 

Action

 

 

 

 

 

 

1

Refer to the PathBuilder S200 Series Basic Protocols. However, you do

 

 

 

not need to complete these configuration parameters:

 

 

 

• Clock Speed

 

 

 

 

 

• Connection Type

 

 

 

 

 

• Port Control

 

 

 

 

 

 

 

 

2

Configure the clock source parameter under port configuration as

 

 

 

follows:

 

 

 

 

 

 

 

 

 

 

 

INT

 

Use this parameter when providing

 

 

 

 

 

clock to the network.

 

 

 

 

 

 

 

 

 

EXT

 

Use this parameter when using the

 

 

 

 

 

network-provided clock

 

 

 

 

 

(usual mode for DSU operation).

 

 

 

 

 

 

 

 

 

 

 

 

 

PathBuilder S24x, 26x, and 27x Switch Hardware Installation

3-7

Page 75
Image 75
3Com S27x, S26x, S24x installation manual Configuration, Procedure, Int, Ext