Configuring Channelized Data
Line Coding Type (continued)
Description:
Selects type of zero suppression used on the T1 link.
•B8ZS: Consecutive 8 zero suppression (clear channel)
•B7ZS: Stuffing: (56k x N)
•AMI: Alternate mark inversion (user equipment must maintain density)
Transmit Clock
Range: | INT, REC | ||
|
| ||
Default: | INT | ||
|
|
| |
Description: |
| Selects the source of transmit clock. | |
|
|
| • INT: Internal Oscillator |
|
|
| • REC: Received Timing |
|
|
| Note |
|
|
| |
|
|
| |
|
| Only one T1 port on the card can be selected for REC timing. | |
|
|
|
|
Line Build Out
Range: | 0 to 4 |
|
|
|
|
Default: | 0 |
|
|
| |
Description: | Select the Line Build Out to match the physical interface. For a | |
| DSX interface, select the number based on the cable length: | |
| • 0: | 0 to 133 ft |
| • 1: | 134 to 266 ft |
| • 2: | 267 to 399 ft |
| • 3: | 400 to 533 ft |
| • 4: | 534 to 655 ft |
| For a DS1 interface, select the number based on the signal level: | |
| • 0: | 0 dB |
| • 1: | |
| • 2: | |
| • 3: | |
| • 4: Invalid for DS1 interfaces | |
|
|
|
Facility Data Link |
| |
|
| |
Range: | None, ANSI, ATT | |
|
|
|
Default: | None |
|
|
| |
Description: | Describes the use of the facility data link channel. Appears only if | |
| ESF is selected as Line Framing Type. | |
|
|
|
Channelized Data |
