3Com S24x, S27x, S26x installation manual Step Action Description

Installing the PathBuilder S24x, 26x, and 27x Switch in an Equipment Rack

Step	Action		Description
6	Remove the long (#6) screws.	The PathBuilder S24x, 26x, and
	Then, slide the PathBuilder S24x,	27x switch is now securely
	26x, and 27x switch flush against	attached to the equipment rack and
	the rear flange of the Mounting	ready for connection to devices and
	Shelf and reinsert the screws	power.
	through the flange and into the		Note
	unit’s case.
		The unit is now accessible mainly
		from the front and will require
		complete removal from the rack to
		perform maintenance routines.

Preparation and Unpacking 2-9