INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
3. Wireless LAN Module:
•Country Code
As available frequency bands are different from country to country, be sure to set a country code before installing a wireless LAN module in a user’s printer. Also, ask an end user to confirm a country code. Use of a wireless LAN module with a wrong country code could violate each country’s Laws and Regulations for Radio Equipment, and violators could be subject to penalties.
The country code cannot be changed through the Web browser, but TELNET.
<How to set a country code using TELNET>
CAUTION! The following information must not be disclosed to users. (Internal use only)
(1)Disconnect the LAN cable connected to the printer, connect the printer to a host PC with a straight LAN cable via a relay connector.
When using a hub in place of a relay connector, use a cross cable or
(2)Open the
(3)Enter a password to log in. (Password: tecbcp)
(4)From the top menu, change a country code using the following command. =>ctry XX (XX=new country code. See Country Code Table.)
(5)The new country code will become effective by turning the printer off and on again.
(6)A country code can be checked by typing “=>ctry” on the telnet console.
<Country Code Table>
Country | Country name | Country | Country name | Country | Country name | |
code | code | code | ||||
|
|
| ||||
US | U.S.A./Canada | GR | Greece | IE | Ireland | |
FR | France | SE | Sweden | GB | U.K. | |
PT | Portugal | HU | Hungary | AU | Australia | |
NO | Norway | BE | Belgium | FI | Finland | |
DE | Germany | IT | Italy | LU | Luxembourg | |
ES | Spain | NL | Netherlands | CH | Switzerland | |
IS | Iceland | LI | Liechtenstein | NZ | New Zealand | |
AT | Austria | DK | Denmark |
|
|
Regarding various settings or operation check for the wireless LAN, refer to the System Mode Manual.
3- 6
