Pioneer DV-C603 Digital Audio Connections, Analog Audio Connection, Audio OUT

Audio Connections

This player features two digital (optical and coaxial) and also analog audio output formats.

Digital Audio Connections:

You can enjoy the digital audio recorded on DVD, Video CD or CD discs from both optical digital and coaxial digital output jacks.

When making digital audio connections, do not make connections from both the coaxial and optical digital outputs to the same component.

When a DVD recorded in Dolby Digital, DTS, or MPEG is loaded, noise will be output if you have made connections via the digital audio jacks to a receiver or amplifier that cannot decode a Dolby Digital, DTS, or MPEG digital bitstream. In this case, be sure to set the [Digital Jack] setting in the Setup Navigator to best reflect the type of system you are using (page 20). Additionally, the digital audio settings can be adjusted manually in the Setup screen Audio 1 menu (page 28- 29).

DIGITAL OUT (Optical)

The digital signal is transmitted as light pulses through a fiber-optic cable.

•Use to connect to an AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder.

•Use a fiber-optic cable (not supplied) to connect the DIGITAL OUT OPT (optical digital output) on the player to the optical digital input on an AV amplifier or receiver.

		VIDEO
	Y	OUT
		SELECT
AUDIO OUT
R	L
		DIGITAL OUT
1		OPT.
2		AC IN

DIGITAL OUT

OPT.

DIGITAL IN

AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder

DIGITAL OUT (Coaxial)

The digital signal is transmitted electronically through a coaxial cable.

•Use to connect to an AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder.

•Use a coaxial cable (not supplied) to connect the DIGITAL OUT (coaxial digital output) on the player to the coaxial digital input on an AV amplifier or receiver.

		VIDEO
	Y	OUT
		SELECT
AUDIO OUT
R	L
		DIGITAL OUT
1		OPT.
2		AC IN

DIGITAL OUT

OPT.

DIGITAL IN

AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder

Analog Audio Connection:

AUDIO OUT

•Make analog audio connections to a stereo amplifier or receiver.

•Analog audio connections can also be made to a TV or monitor with stereo input jacks.

•Use the supplied audio cord to connect one of the AUDIO OUT jack on the player to the audio input on the stereo amplifier or receiver.

•When making analog audio connections, be sure to match the color of the plugs with the color of the jacks (red and white).

		VIDEO
	Y	OUT
		SELECT
AUDIO OUT
R	L
		DIGITAL OUT
1		OPT.
2		AC IN

AUDIO OUT

RL

1

2

AUDIO IN

RL

Stereo amplifier or receiver

16