Pioneer DV-C603 Resuming Playback from Where You Stopped DVD/Video CD, DVD/Video CD/CD

Resuming Playback from

Where You Stopped – DVD/Video CD

Use the resume feature to restart playback from the point that the disc was stopped last time.

Press STOP 7 once.

The display shows “RESUME” and the stop position is memorized.

•The resume position remains memorized as long as the disc is in the play position — even if you switch the power off.

If you change the disc in the play position or start playing another disc, however, the resume position is lost.

•Pressing STOP 7 twice causes the disc to return to the beginning when PLAY 3 is pressed again. The display shows the disc type (DVDs or Video CDs)

Press PLAY 3.

Playback starts from the resume position.

Notes

•The actual restart position may be slightly before or after the resume position.

•If you want to remove or change the disc, but still want to resume playback from the last stopped position, use the LAST MEMORY feature instead (page 50).

CAUTION: When moving the unit

When changing places of installation or packing the unit for moving, be sure to remove all discs and return the disc table to its original position in the player. Then, press STANDBY/ON and switch the power to standby. Check that the “--OFF--” indication on the display goes off, then disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit.

Stopping Playback and

Switching Power Off

– DVD/Video CD/CD

4		LAST	CONDITION	OPEN/	2
		MEMORY	MEMORY	CLOSE
		LAST	COND.	0
	AUDIO	SUBTITLE	ANGLE	DISPLAY
				DISP
	SETUP	MENU		TOP MENU
			5	RETURN
	VNR
	5		ENTER	5
	PREV			NEXT
1	4		5	¢￿
	STOP		PLAY	PAUSE
	7		3	8
	STEP/SLOW		REV	FWD
	e	E	1	Á￿
				CLEAR
	1	2	3	C
	4	5	6	+10
	7	8	9	0
	PROGRAM	REPEAT	A-B	SEARCH MODE

4 3 2

			DISC			0
	1	2	3	4	5
	DVD PLAYER￿						GETTINGSTARTED
		41 Á¢￿		1		3
				7	8	3
1 Press STOP 7 (7 on the front panel).							USING
							YOUR DVD
Playback stops.
2 Press OPEN/CLOSE 0 (0 OPEN/CLOSE on
the front panel).							PLAYER
•	The tray rotates and the disc that was playing is
•	The disc tray comes out.
	located towards the front of the table.

3 Remove the disc.

•If you want to remove more discs, press DISC SKIP to rotate the disc tray.

4 Press ( STANDBY/ON on the front panel).

The disc tray goes back in.

25