Pioneer DV-F727 Stopping Playback and Switching Power Off

29
1Press STOP 7 (7 on the front panel).
Playback stops.
2 Press ( STANDBY/ON on the front panel).
The player is put in standby.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
Î
4 ¢1¡
7
3 8
2 1
4 ¢ 1
87
e E
¡
3
1
2
Resuming playback from where
you stopped –– DVD/Video CD
With this player, it is possible to resume play of a DVD
even when play has been stopped.
Press STOP 7 once to enable play to resume
from a point shortly before the DVD was stopped
when PLAY 3 is pressed again.
• To begin playback of the disc that most recently been
played from the beginning, press STOP 7 twice to
turn off resume playback, and then start playback
again.
• When STOP 7 is pressed, “RESUME” appears in the
display window for as long as resume playback is
possible. If the function is canceled, “RESUME”
disappears.
• Resume playback is canceled in the following
conditions:
*OPEN/CLOSE 0 (OPEN/CLOSE on the front panel)
is pressed to open the hood.
*MULTI DIAL on the remote control (when the dial
mode indicator is lit green) or the selection dial on
the front panel is turned.
*Another disc is selected.
Note
If you want to continue viewing a DVD at a later time or date, it
is recommended to use the Last Memory function described on
page 61.
About the Last Disc Memory function
Even after you have turned the player’s power off, the
player maintains in memory what disc was playing, as
well as the play mode. When power is turned on again,
pressing PLAY 3 (3 on the front panel) starts playback
from the last disc that was played in the previously
selected play mode.
If the playback is stopped and the player is turned off
during program play, random play, Best play, Previous
Scan, or Hi-Lite scan, these functions will not be
resumed when the player is turned on again and PLAY 3
(3 on the front panel) is pressed.
GETTING STARTED USING YOUR DVD PLAYER