23

Loading DVDs, Video CDs and

CDs into the Player– DVD/Video CD/CD
You can load as many as 300 discs into the rack. Disc
positions in the rack are numbered clockwise from 1 to
300 starting after the single loader slot. The procedure
on this page describes how to load discs starting from
the number 1 position. However, the same procedure
can be followed when you want to change or add more
discs at a different time.
1Press ( STANDBY/ON on the front
panel).
2Press OPEN/CLOSE 0 (OPEN/CLOSE on the
front panel).
The disc rack hood slides open.
Getting StartedUsing Your DVDPlayer
SETTING UP THE PLAYER / GETTING STARTED USING YOUR DVD PLAYER
3Load discs in the rack.
• The number 1 position is immediately to the left
of the single loader slot.
• Load discs with the label side facing to the right.
(When loading double-sided DVDs, load the disc
in the rack with the label denoting the contents
you want to view facing the right.)
• Do not place more than one disc in the same rack
position as that may damage the disc and cause
the player to malfunction.
4Press SELECT DISC NUMBER (the dial mode
indicator lights green) and then turn MULTI
DIAL to rotate the rack to the next position.
When using the front panel, turn the selection
dial clockwise to rotate the rack to the next
disc position.
• The rack rotates the amount that either MULTI
DIAL or the selection dial is turned.
• Turning the MULTI DIAL or the selection dial
counterclockwise rotates the rack in the opposite
direction.
5Repeat steps 3 and 4 to continue loading
discs in the rack.
6When you have finished loading discs into the
rack, press OPEN/CLOSE 0 (OPEN/CLOSE
on the front panel).
The hood slides closed and the rack makes a single
revolution while the player determines where discs
have been loaded in the rack.
Note
Never force the hood open or closed. Doing so may cause part
damage or player malfunction.
4 ¢ 1
87
e E
¡
3

12,6

Dial mode
indicator

4

4

Î
4 ¢1¡
7
3 8
43
1 2,6
Label side