Pioneer DVD-204 instruction manual Master Player, LDV-2 Splitter Cable

	VIDEO		VIDEO
	MONITOR		MONITOR
	OR PROJECTOR		OR PROJECTOR
		Pioner DVD Players
	Master Player	Models DVD-7400, DVD-7300, or DVD-7200
			Slave Player "A"
All Players Must Be Set	DVD		DVD
To 9600 Baud

Note: Although only 2 players are shown, the hookup for 3 or 4 players is similar.

LDV-2 Splitter Cable

OR: LDV-3 for 3 players LDV-4 for 4 players

Note: SLAVE DELAY setting provides a time delay in case the Slave player is slower in seeking back to the start frame than the master player.

DVD-204 OR DVD-212 CONTROL SET "SLAVE DELAY" TO 1 SECOND

For Continuous (Repeat) Play:

Program control unit's "Idle" function to desired Chapter (or start and stop frames).

System will then repeatedly play selection. System will start automatically when power is applied.

If Slave player does not start	"Slave Delay" introduces a slight pause at the
	beginning. This allows extra time for the "slave"
increase Slave Delay time.
	players to be ready to play, should one or more
Usually 1 second (10 tenths)	of them take longer to seek to the start point than
is adequate.	the "Master" took. This is virtually always less
	than one second.

MARCH 98 MPC

Revised December 21 1999

Revised and Issued 4-21-2001LDV_2_DVD.FCWMinor revision July 1 2004

Multi-Player Hookup

Museum Technology Source Inc.

323 Andover St. Wilmington MA 01887

800-729-6873 www.museumtech.com