Pioneer DVD-V7400 manual Lead-Out Symbol, Clear, Losecr RCR, Loplcr RCR

Command Descriptions

5.19Lead-Out Symbol

Function	:	Lead-Out is set for an address
Format	:	LO Command <CR>

Explanation : This symbol can be used in place of a Time Code or a Frame number as a target address for the Search or Auto Stop functions.

If the player has read the Table of Contents (TOC) from a disc, the Lead-Out Address or Frame Number can be translated into the lead-out Time.

The Lead-Out Search command on a CD or VCD disc stops the player at the end of a program area prior to the read-out area while the Lead-Out Search command on a DVD disc stops the player at the end of this Title.

NOTE: On a VCD disc, the Search address is set several seconds prior to the lead-out point because the Lead-Out command requires the player to read video data in advance.

Execution :
	String	Status Return	DVD player
	LOSE<CR>	R<CR>	Search to Still mode
	?T<CR>	13642<CR>	Time code in program end area
	LOPL<CR>	R<CR>	Continue playing to lead-out and
			then return R<CR>

5.20 Clear

Function	:	Clears the digit buffer or mode
Format	:	CL

Explanation : The command clears the digit buffer content (input value) and returns the completed status message immediately.

The command releases the Auto Stop or the Stop Marker modes and returns the completed status message immediately. After the commands are released, the player begins normal playback. But the command does not release the Multi Speed command.

The Clear command releases the Repeat mode and erases the Command Stack selections.

- 26