Pioneer DVH-390MP manual Connecting with the ISO connector

Section

14 Connection

Connecting with the ISO connector

E 15 cm 15 cm	Fuse (10 A)
	1	3	5	7
	2	4	6	8
	1	3	5	7
	2	4	6	8
A	B

To Speaker

To Vehicle

From antenna

Pin and the function of the ISO connector

To Speaker

1Rear right +

2Rear right *

3Front right +

4Front right *

5Front left +

6Front left *

7Rear left +

8Rear left * To Vehicle

1Not used.

2Not used.

3Phone mute

4Back up

5System remote control

6Illumination

7Accessory

8Chassis ground

To the wiring of the vehicle

!Yellow/black (Phone mute)

If you use an equipment with Mute func- tion, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

!Black (chassis ground)

Connect to a clean, paint-free metal loca- tion.

!Orange (Illumination)

Connect to lighting switch terminal.

!Red (Accessory)

Connect to terminal controlled by ignition switch (12 V DC).

!Yellow (Back up)

Connect to the constant 12 V supply term- inal.

!Blue/white (System remote control) Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

44 En