Pioneer DVR-310 operating instructions Standard timer recording, 12/13 WED 1145 AM, Use

06Recording

3 Use(cursor buttons) to move the cursor to the recording start date and time on the grid.

				Current time
									Recording start time
Easy Timer Recording
	AM							PM
	8:00		9:00	10:00			11:00	12:00		1:00	2:00
12/13
12/14
12/15
	12/13 WED					11:45 AM				- -:- -
CHANNEL +/–		32			REC MODE FINE

Each row of the grid is one day (you can set the timer recording for up to a month in advance). Each column is a 15 minute interval.

The darker area represents time that has already passed and can’t therefore be selected. The lighter area is time that’s available.

4 Press ENTER to set the start time.

The start date and time is displayed in the middle of the screen.

•You can go back and reset the start time if you need to by pressing RETURN.

5 Use the			(cursor left/right) to move the
cursor to the recording end time on the grid.
			Recording start time
							Recording end time
	Easy Timer		Recording
		AM	PM
		11:00	12:00	1:00		2:00		3:00	4:00	5:00
	12/13
	12/14
	12/15
		12/13 WED			11:45 AM				1:45 PM
	CHANNEL +/– 32			REC MODE FINE

As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to 6 hours can be set.

6Press ENTER to set the end time and exit the timer recording screen.

•You can check the timer program you just set from the main timer recording screen (see Standard timer recording below).

Standard timer recording

The timer recording screen you can see all the timer programs already set, clear programs and set up new ones.

CLEAR

ENTER

HOME

MENU

TIMER REC

1Press TIMER REC to display the Timer Recording screen.

You can also access the Timer Recording screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording (View)).

This screen shows all the timer programs currently set.

Timer Recording
Date	Start	Stop	CH	Mode	Result
12/13 WED	7:00 PM	8:00 PM	32	SP	OK
		New Input

DVD Remain 1h00m(FINE) 1/1

•The amount of free space available on the currently loaded recordable DVD is shown towards the bottom of the screen.

•In the lower-right corner, the number of timer programs already set is shown.

•Each row is for one timer recording program, with the date and time information, frequency, channel, recording mode and whether there’s enough space to record.

•If there are more than eight timer programs already

set, press NEXT		to switch page (go back using
the PREV	button).

•You can also clear a timer program by highlighting it and pressing CLEAR.

46

En