Copying and back-up

Using disc back-up*

This feature offers a simple way to make a back-up copy of a finalized Video mode disc. The data is copied first to the hard disk drive, then on to another recordable DVD disc.

* See also Copyright on page 57.

1Press HOME MENU.

2Select ‘Copy’

3Select ‘Disc Back-up’.

4Select a back-up option.

Disc Back-up

Start new disc back-up

Resume writing data

Erase back-up data

There are three back-up options:

Start new disc back-up– Start making a back-up of a disc.

Resume writing data – Record the back-up data already on the HDD to a recordable DVD.

Erase back-up data – Erase the back-up data on the HDD.

5 Press OPEN/CLOSE to open the disc tray and load the disc you want to make a back-up of, then close the disc tray.

You can only make back-up copies of finalized Video mode discs.

Disc Back-up

No Disc.

Please load a disc to be backed-up.

Start Cancel

6 Select ‘Start’.

Disc Back-up

Read from disc and save to HDD.

Start reading?

Start Cancel

07

7 When the data has been copied, press OPEN/ CLOSE to open the disc tray. Take out the disc and load a blank recordable DVD.

Disc Back-up

Disc content saved to Hard Disk Drive. Please eject the disc and load a recordable disc.

Start Cancel

The table below shows the discs you can use for back-up when the source disc is DVD-R and DVD-RW:

back-up

DVD-R *1

DVD-RW *2

DVD-R

DVD-RW

*1 Ver. 2.0 for General DVD-R disc

*2 Ver. 1.1 DVD-RW disc

• Note that the actual recordable capacity of discs vary.

8Select ‘Start’ to start writing the backed-up data to the blank disc.

Disc Back-up

Write back-up data from Hard Disk Drive.

The disc contents will be overwritten.

OK to start?

Start Cancel

To see the progress of the back-up, press DISPLAY.

You can cancel the back-up process by pressing ONE TOUCH COPY for more than 1 second. However, this will make the disc unusable (although if you are using a DVD-RW disc you can re-initialize it in order to make it usable again—see Initializing a DVD-RW disc on page 55.)

9After the recorder has finished recording the back-up disc, you can select whether to make another back-up of the same data or exit.

Disc Back-up

Disc back-up finished.

To make another back-up copy, please load a recordable disc.

Start Cancel

To see the progress of the back-up, press DISPLAY.

You can cancel the back-up process by pressing ONE TOUCH COPY for more than 1 second.

Select Start to make another back-up copy or Cancel to finish. If you want to make another back-up copy, return to step 6 above.

67

En

Page 67
Image 67
Pioneer DVR-510H manual Copying and back-up Using disc back-up, Back-up DVD-R *1 DVD-RW *2, Dvd-R Dvd-Rw