Pioneer DVR-510H Add, Press Home Menu Select ‘Copy’, Select ‘HDD, Select ‘Start’ to begin copying

Copying and back-up 07

1Press HOME MENU.

2Select ‘Copy’.

	Timer Recording		Disc Setup
	Disc History		Initial Setup
	PhotoViewer		Video/Audio Adjust
	Disc Navigator		Play Mode
	Copy		DV Record
3	Select ‘HDD	DVD’.
4	Use the	(cursor up/down) buttons to select

a command from the Copy List menu options on the left side of the screen.

The following commands are available:

•Add – Select and add titles to the Copy List (see page 59).

•Chapter Edit (Chpt Edit) – Edit chapters within a Copy List title (see page 60).

•Move – Change the order of titles in the Copy List (see page 61).

•Erase All – Erase the Copy List (see page 62).

•Next – Start recording using the current Copy List (see step 5 below).

•Preview – Check the content of a title in the Copy List (see page 62).

•Erase – Erase individual titles from the Copy List (see page 62).

•Title Name (Ttl Name) – Name or rename titles in the Copy List (see page 62).

•Divide – Divide a title in the Copy List into two (see page 63).

•Combine – Combine two adjacent titles in the Copy List into one (see page 63).

5Select ‘Next’ to proceed to the copy settings screen.

6 Use the	(cursor left/right) buttons to select
the Recording Mode.
HDD to DVD Copy
HDD
	HDD DVD-RW VIDEO	Required 0h52m
	Recording Mode	High Speed
Add		Start
Erase	Copy List Total	4049MB
Move
	Current DVD Remain	4467MB
Divide
		/ 4467MB
Combine
Next

•High Speed Copy – The Copy List is copied at the same recording quality as the original. (See page 56 for more information on high-speed copying.)

•FINE, SP, LP, EP, MN – The Copy List is copied at the specified recording quality in real-time. (Note that if you copy at a higher quality setting than the original, the copy will not be better quality than the original.)

•If you select MN above, you can also change the level setting (MN1–MN32) from the Recording Quality box that appears.

•Optimized – The recording quality is automatically adjusted so that the Copy List fits on to the space available on the disc.

When you change the recording quality setting, you can see how much disc space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying. In this case, either change the recording quality, or press RETURN to go back to the Copy List screen and erase one or more titles from the Copy List.

7 Select ‘Start’ to begin copying.

Note

•When the copy mode is set to something other than High Speed Copy for copying to a Video mode DVD, the chapter markers of the original are not copied.

Chapter markers are put into the copy at regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) on page 97).

Add

Use this command to add one or more titles to the Copy List.

1 Select ‘Add’ from the Copy List menu options.

2 Use the (cursor left/right) buttons to select a title from the HDD to add to the Copy List, then press ENTER.

HDD to DVD Copy

All

HDD 1 2 3 4

HDD

		8/11Sun 4:00PM	2ch LP	1/3
Add	DVD 1	2	3	4
Erase
Move
Divide		Copy List	Total 1h30m	1/2
Combine

Next

The thumbnail appears in the Copy List section in the lower half of the screen.

•To change the displayed information for the selected title, press DISPLAY.

59

En