Copying and back-up

07

5Select ‘Next’ to proceed to the copy settings screen.

6 Use the

(cursor left/right) buttons to select

the recording quality.

 

DVD to HDD Copy

 

Original

 

 

DVD

DVD HDD

Required 1h30m

 

 

Recording Mode

SP

Add

 

Start

Erase

Copy List Total

1h30m

Move

Current HDD Remain

30h00m

Preview

/ 34h00m

Erase All

 

Next

 

High Speed Copy – Only available when copying Original content to a VR mode disc. The Copy List is copied at the same recording quality as the original. (See page 56 for more information on high-speed copying.)

FINE, SP, LP, EP, MN – The Copy List is copied at the specified recording quality in real-time. (Note that if you copy at a higher quality setting than the original, the copy will not be better quality than the original.)

If you select MN above, you can also change the level setting (MN1MN32) from the Recording Quality box that appears.

When you change the recording quality setting, you can see how much hard disk space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying. In this case, either change the recording quality, or press RETURN to go back to the Copy List screen and erase one or more titles from the Copy List.

7 Select ‘Start’ to begin copying.

Add

Use this command to add one or more titles to the Copy List.

1 Select ‘Add’ from the Copy List menu options.

2 Use the (cursor left/right) buttons to select a title from the DVD to add to the Copy List, then press ENTER.

DVD to HDD Copy

Play List

DVD

1

2

3

4

 

DVD

 

 

8/11Sun 4:00PM

2ch LP

1/3

Add

HDD 1

2

3

4

Erase

Move

 

 

 

 

Preview

 

Copy List

Total 1h30m

1/2

Erase All

 

Next

The thumbnail appears in the Copy List section in the lower half of the screen.

You can’t add titles which would make the total running time of the Copy List more than 6 hours.

3Repeat step 2 to add more titles to the Copy List, or press RETURN to go back to the Copy List menu options.

Note

Titles which were recorded directly to a VR mode disc or have already been copied real-time, and which contain Dual Mono audio or are recorded in recording modes MN12MN20can be added to the Copy List, however if High Speed Copy is selected they will not actually be copied.

Similarly, a copy-once protected title, recorded from the TV for example, can be added to the Copy List, but it will not be copied if High Speed Copy is selected.

65

En

Page 65
Image 65
Pioneer DVR-510H manual Select ‘Next’ to proceed to the copy settings screen Use, Recording quality