The Initial Setup menu14
106
En
Chapter 14
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
Display
Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System 525 System
Use for NTSC or PAL-60 recording from an external
input.
625 System
Use for standard PAL or SECAM recording.
Taiwan and Philippines model: Default setting is
525 System
. Other: Default setting is
625 System
.
See also About the input line system on page 116 for more information on this setting.
Power Save
(except Taiwan and
Philippines model)
On
No antenna input signals are passed through to the
outputs when the recorder is in standby.
Off •
When the recorder is in standby, all signals arriving
at the antenna inputs are passed along to the
outputs.
HELP Setting On •
Switches on the automatic Help screens for GUI dis-
plays.
Off
Switches off the automatic Help screens for GUI dis-
plays. (Press
HELP
on the remote to manually display
the Help screen.)
Setup Navigator Start
Select to start the Setup Navigator. See also
Switch-
ing on and setting up
on page 28
.
DVR745H_IBD_EN.book 106 ページ ２００６年７月２７日 木曜日 午後４時１１分