Recording 05
45
En
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCK
.
If any buttons are pressed on the remote or
front panel,
LOCK
is briefly displayed again.
•To unlock the recorder, press and hold
STOP
on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCK
.
Timer recording FAQ
Frequently Asked Questions
•Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see
Lock Disc
on
page 99), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer
program! Why not?
You can’t enter a timer program if the
clock isn’t set.
• What happens when two or more timer
programs overlap?
Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is
finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.
Simultaneous recording and
playback (Chase Play)
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see
Using the Disc Navigator with recordable
discs and the HDD
on page 55).
Chase Play is not possible when DV is the
recording input.
Important
• You can’t use this feature during Auto
Start Recording, or in Auto Start
Recording standby (the
AUTO
indicator
is lit in the front panel display).
• Press during recording to
start playback from the beginning of the
current recording
1
.
• Press during recording to
select another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
• To stop playback, press
STOP
(recording will continue).
• To stop recording, press
STOP REC
(playback will continue).

STANDBY/ON
Note
1You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
HDD
PLAY
DISC NAVIGATOR
DVR745H_IBD_EN.book 45 ページ ２００６年７月２７日　木曜日　午後４時１１分