Recording 05
37
En
2 Select a TV channel to record.
The front panel display shows the channel
number:
• While the recorder is stopped, you can
also use the number buttons on the
remote to select the channel (For
channel 24, press
2, 4
then
ENTER
).
• If the recorder is stopped, you can also
use the
CH
+/–
buttons on the front
panel to select the channel number.
3 Set the picture quality/recording
time.
• See
Setting the picture quality/recording
time
on page 36 for detailed instructions.
4 Select the audio channel to
record.
See
Changing audio channels
on page 35 for
more on this.
Taiwan and Philippines model:
• When recording in VR mode (DVD) or
with HDD Recording Format set to Video
Mode Off (HDD), both mono and SAP
audio channels are recorded, allowing
you to switch the audio channel on
playback. The only exception to this is
when the picture quality is set to
LPCM
,
in which case you do need to select the
audio channel before recording.
Other:
• When recording in VR mode, if a
broadcast is bilingual, both audio
channels are recorded, allowing you to
switch the audio channel on playback.
The only exception to this is when the
picture quality is set to
LPCM
, in which
case you do need to select the audio
channel before recording.
5 Start recording.
If you want to set a recording end time, press
the
REC
button repeatedly. The recording
time increases in 30 minute increments, up
to a maximum of six hours. The time the
recording will end is shown on-screen and in
the front panel display. When the recording
ends, the recorder automatically switches
into standby if no other operation is being
performed.
• To cancel the set recording time, press
REC
.
• If you want to pause recording at any
time
1
, press
PAUSE
. Press again to
restart the recording (If recording to the
HDD, DVD-RAM or in VR mode, a new
chapter is started after recording
restarts).
6 Press to stop recording.
• If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing
STOP
REC
.
• Recording will stop automatically when
there is no more space on the HDD/
DVD, or after 12 hours of HDD recording
(whichever is sooner).
CH
Channel number
REC MODE
AUDIO
Note
1 Except during Chase Play.
REC
STOP RE
C
DVR745H_IBD_EN.book 37 ページ ２００６年７月２７日　木曜日　午後４時１１分