The Initial Setup menu 14
107
En
Tuner
Auto Channel
Setting
(Taiwan and
Philippines model)
Antenna •
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to com-
plete.
Cable
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
Auto Channel
Setting
(Other)
Next Screen
Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press
ENTER
to exit this screen.
Manual CH Setting Next Screen
Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
NEXT
buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to
On
.
• Set the
CH System
setting to match the channel
system of your country or region (
except Taiwan and
Philippines model
).
• Set the
Channel
setting to the channel you want to
assign to the current channel preset (
except Taiwan
and Philippines model
).
• To manually fine tune the channel, change the
AFT
setting to
Off
then adjust the
Level
setting.
•
(
except Taiwan and
Philippines model
)
.
• The
Name
field allows you to input a name of up to
five characters for the current channel preset (
except
Taiwan and Philippines model
).
Channel Swapping
(except Taiwan and
Philippines model)
Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER
.
G-Code CH Setting Next Screen
Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press
ENTER
when your done to leave this screen.
Setting Options Explanation
DVR745H_IBD_EN.book 107 ページ 2006年7月27日 木曜日 午後4時11分