Samsung HW-M460/XE Troubleshooting, The unit will not turn on, Sound dropouts occur in BT mode

Models: HW-M450/EN HW-M460/XE HW-M450/ZG

1 150
Download 150 pages 36.19 Kb
Page 35
Image 35
11 TROUBLESHOOTING

11 TROUBLESHOOTING

Before seeking assistance, check the following.

The unit will not turn on.

Is the powercord plugged into the outlet?

;; Connect the power plug to the outlet.

A function does not work when the button is pressed.

Is there static electricity in the air?

;; Disconnect the power plug and connect it again.

Sound dropouts occur in BT mode.

;; See the Bluetooth connection sections on pages 11 and 17.

Sound is not produced.

Is the Mute function on?

;; Press the VOL button to cancel the function.

Is the volume set to minimum?

;; Adjust the Volume.

The remote control does not work.

Are the batteries drained?

;; Replace with new batteries.

Is the distance between the remote control and Soundbarmain unit too far?

;; Move the remote control closer to the Soundbar main unit.

The red LED on the subwoofer blinks and the subwoofer is not producing sound.

This issue can occurif the subwooferis not connected to the Soundbarmain unit.

;; Try to connect your subwoofer again. (See page 6.)

The subwoofer drones and vibrates noticeably.

Tryto adjust the vibration of yoursubwoofer.

;; Push the WOOFER button on your remote control up or down to adjust the subwoofer volume. (between -12, -6 ~ +6).

ENG - 31

Page 35
Image 35
Samsung HW-M460/XE manual Troubleshooting, The unit will not turn on, A function does not work when the button is pressed