Playing and recording from a DV camcorder07

64
En

Chapter 7

Playing and recording from a DV camcorder
You can play back and record video from a
DV camcorder connected to the
DV IN
jack
on the front panel of this recorder.
Important
•If you connect a second recorder using a
DV cable, you cannot control the second
unit from this one.
•You can’t control this unit remotely from
a component connected to the
DV IN
jack.

Playing from a DV camcorder

1 Make sure your DV camcorder is
connected to the front panel DV IN jack.
2From the Initial Settings menu, check
that the DV audio input is setup as you
require.
See
DV Input
on page 109 for more on this.
•Check also that the
Audio In
settings for
External Audio
and
Dual Mono
Recording/Bilingual Recording
are as
you want them (see
Audio In
on
page 108).
3 Select ‘DV’, then ‘DV Video
Playback’ from the Home Menu.
4 Start playback on the camcorder.
Images from the camcorder should appear
on your TV.
• To record the incoming video, press
HDD/DVD
to select the HDD or a DVD
for recording, then press
REC
. Press
STOP REC
to finish recording.
If there is no signal from the device
connected to the DV jack, or the signal is
copy-protected, recording will pause. It
will automatically restart once there is a
recordable signal.
• The recorder will only start recording
from the
DV IN
jack if there is a valid
signal. Recording will pause if the signal
is interrupted during recording.
• If your source is copy-protected using
Copy Guard, you will not be able to
record it. See
Restrictions on video
recording
on page 34 for more details.

Recording from a DV

camcorder

Using the recorder’s remote, you can control
both the camcorder and this recorder.
Important
• The source signal must be DVC-SD
format.
• Some camcorders cannot be controlled
using this recorder’s remote.
• You can’t record date and time
information from DV cassette.
•During DV recording, if a part of the tape
is blank, or has copy-protected material
on it, this recorder will pause recording.
Recording will restart automatically
when there is a recordable signal.
However, if there is more than 10
seconds of blank tape, this recorder will
stop recording and the camcorder
should stop (depending on the
camcorder).
HOME
MENU
DVR745H_IBD_EN.book 64 ページ ２００６年７月２７日　木曜日　午後４時１１分