PART NAMES AND FUNCTIONS
Front Panel |
|
| Rear Panel |
1 | 2 | 3 | 8 |
| SCSI | ||
|
|
| |
|
|
| ID |
| R |
|
|
DISC READ/WRITE |
|
|
|
|
|
| AC |
|
|
| IN |
4 5 | 6 | 7 | 0 |
9
ON OFF
TERMINATION
SCSI
-
English
1 Disc tray | 6 OPEN/CLOSE (0) button |
Place the disc on the tray with its label side facing up (Operate | Opens and closes the disc tray |
with the OPEN/CLOSE button) |
|
2Filter cover
Sliding the filter cover to the right and then removing it will expose the filter located to the rear of the cover. Note that the ventilation holes located on the cover are designed to prevent the drive from overheating, and that the drive should be placed so that these ventilation holes remain unblocked, as failing to do so may result in breakdown or malfunctioning.
7POWER switch
Turns the power ON and OFF
8SCSI ID switch
Sets the device’s SCSI ID
9TERMINATION switch
Turns the device’s SCSI termination ON and OFF
3Power indicator
Lights when the power has been turned ON
4DISC indicator
Lights when a disc has been inserted
When tray is opened or closed | Blinks green |
|
|
Lights green | |
|
|
Lights orange | |
|
|
Unsupported disc | Blinks orange |
|
|
5Operation (READ/WRITE) indicator
Operation status is indicated as follows:
0AC inlet (AC IN)
Provides a connection point to a wall outlet (AC 100 to 240 V; 50/60 Hz) when the accompanying power supply cord is used
-SCSI connectors
Two SCSI amphenol 50 P connectors are provided for SCSI chain connection (either connector may be used)
During reading
During writing
When an error occurs •Abnormal rise in
internal temp •Lens or disc dirty •Other error
Lights green
Lights orange
Blinks orange
•Blinks 1x and then repeats
•Blinks 2x and then repeats •Blinks 3x and then repeats
7
<DRC1101> En
