Selecting the Digital Attenuator (DIG.ATT)

When listening to a CD or other source on which the recording level is high, setting the equalizer curve level to “H” (high) may result in distortion.

You can switch the digital attenuator to “L” (low) to reduce distortion. (Sound quality when the setting is “H” (high) is better than when the setting is “L” (low), so usually set to “H” (high).)

1.Press the FUNCTION button and select the Digital Attenuator mode (DIG.ATT) in the Initial Setting Menu.

2.Select the desired attenuation

level with the 2/3 buttons.

L ï H

Selecting the Contrast (CONTRAST)

You can adjust the contrast of the product’s display.

1.Press the FUNCTION button and select the Contrast mode (CONTRAST) in the Initial Setting Menu.

2.Select the desired Contrast

with the 2/3 buttons.

The display shows “+7” – “–7”.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

48

Page 49
Image 49
Pioneer FH-P8800 operation manual Selecting the Digital Attenuator DIG.ATT, Selecting the Contrast Contrast