Digital Parking Assistance Camera | |
Cámara digital de auxilio de estacionamiento | |
Owner’s Manual | ENGLISH |
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
a reverse gear connection function. |
• Direct sunlight or strong light (sunlight reflected |
from a bumper etc) on the camera may result in |
smear above and below the location where the |
light strikes, but this is not a malfunction. |
• This product is designed to supplement the driv- |
er’s rear view, but the camera images do not show |
all dangers and obstacles. Be sure to look behind |
you when reversing to confirm the view. |
• Since this product uses a wide-angle lens, objects |
nearby appear wider and objects far away appear |
narrower, and distance may seem different than |
the actual distance. Always make sure to visually |
check behind your car when backing up. |
| | Beginning Setup |
| ➁ | The setup procedure for this product consists |
| of taking photographs of images of the rear |
|
| ➂ | view camera when viewed from the location |
| where the rear view camera is installed, and |
| ➃ |
| then setting up the camera based on those |
| |
| | photographs after moving the vehicle to a |
| | safe location provided with tire blocks. Move |
| | the vehicle to the location where photographs |
| | are to be taken before beginning the setup |
| | procedure. |
An initial setup is required when using this product for the first time.
Begin the setup procedure after parking the vehicle at the location where photographs are to be taken by referring to the section on “Preparations Before Beginning Setup”.
1. Put the car in reverse.
Note:
•When performing setup, always make sure to set the parking brake and step on the brake to make sure the car is stopped.
A photograph to be used for setup is taken. (Refer to “First Time Setup” and “Changing Basic Settings or Other Settings” for information to get started with photographing procedure.)
1. | Press the ENTER button twice. |
2. | Press the ENTER button again. |
| A photograph of the image of rear view |
| camera is taken. |
3. | Press the ENTER button. |
| Press the ENTER button if the photograph |
ESPAÑOL |
Manual del Propietario |
ND-BC20PA
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
WARNING:
Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental enti- ties to cause cancer and birth defects or other repro-
ductive harm. Wash hands after handling.
• This product is required to be set individually for |
each type of vehicle. When reinstalling this prod- |
uct on a different car such as after purchasing a |
different car, always make sure to change the set- |
tings prior to use. |
• Always drive carefully without relying too much |
on this product. |
• Check camera stand installation before driving. |
Are the screws loose? |
– | Is the camera stand firmly secured? |
– | If the rear view camera comes loose while you |
| are driving it may cause an accident. |
• This device is designed for use ONLY with |
Pioneer unit with rear camera input. Before con- |
tinuing setup, please confirm you are using the |
“Reverse mode” to view this screen. |
• Those Pioneer models compatible with the screen |
display (guide, menu, etc.) of this product are as |
listed below. When combining with other prod- |
ucts, the screen display displayed by the combined |
product may be superimposed on the screen dis- |
play displayed by this product. |
AVIC-Z1 / AVIC-Z2 / AVIC-HD1BT / AVIC-HD3 / AVIC-D3 / AVH-P5900DVD / AVH-P5950DVD / AVH-P7900DVD / AVH-P7950DVD
➀
➀MODE Button
This is used when changing the screen display mode. This is also used to return to the previous screen or discontinue an operation on the setup screen.
➁+ Button
This is used when selecting an item on the setup screen or when adjusting position or angle.
➂– Button
This is used when selecting an item on the setup screen or when adjusting position or angle.
➃ENTER Button
This is used to finalize a display or item on the setup screen.
1.Park the vehicle.
Park the vehicle in the center of the parking space indicated with the white lines.
White lines Center of parking space
2.Move the vehicle forward.
Move the vehicle forward from the location where it has been parked to the location where the photographs are to be taken.
2.Simultaneously press the ENTER and + buttons on the button unit.
3.Press the ENTER button four times.
4.Take the photograph.
Take the photograph to be used for setup. Take the photograph while referring to the section on “Taking Photographs”.
5.Set the basic settings.
Set the basic settings in the order of items A to F of “Basic Settings” based on the photograph taken. Make the settings by referring to “Basic Settings”.
6.Select OK and press the ENTER button.
The initial setup is completed and the settings are stored in memory.
Note:
• Please make sure to read the caution and then |
press the ENTER button to go to the next step. |
• Photograph data is deleted when setup is ended. |
• This camera and associated electronic guides are |
intended solely as a driving aid. This unit is not |
a substitute for you attentiveness, judgement, and |
care while driving, moving, or parking your vehi- |
| taken is satisfactory. Press the MODE |
| button to retake the photograph. |
4. | Press the ENTER button twice. |
5. | Move the car to a safe location pro- |
| vided with tire blocks. |
| Move the car from the location where |
| the photograph was taken to a location |
| provided with tire blocks. |
Note:
•Always make sure that the car has come to a com- plete stop and parked after moving.
•Do not turn off the engine. Photograph data will be deleted if the engine is turned off.
6.Press the ENTER button.
7.Press the ENTER button.
When performing this procedure starting from “First Time Setup”, proceed to step 5 of “First Time Setup”.
When performing this procedure starting from “Changing Basic Settings or Other Settings”, proceed to step 5 of “Changing Basic Settings or Other Settings”.
178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd. Manuel Avila Camacho 138 10 piso
Col. Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
| Published by Pioneer Corporation. |
| Copyright © 2007 by Pioneer Corporation. |
| All rights reserved. |
| Publicado por Pioneer Corporation. |
| Copyright © 2007 Pioneer Corporation. |
| Todos los derechos reservados. |
| Printed in Japan |
<KKNNX> <07D00000> | Impreso en Japón |
<CZR5083-A> E |
IMPORTANT
SAFEGUARDS
•Do not wash your car with an automatic car wash or high-pressure water as it may result in water entering the camera or the camera falling off.
•Do not attempt to heat the surface of the camera lens or camera lens itself with a lighter and so on when they have become frozen. This can cause a malfunction.
•This product is a rear view camera for checking the view at the rear of a car.
A rear view camera is a camera that provides sym- metrical images in the same way as rear and side view mirrors.
En
Take photographs at the location where the white lines cross the dotted lines while referring to the photograph above.
Note:
•Perform setup at a parking space having white lines and tire blocks. The setup will not be correct if the vehicle is not located in the center of the parking space.
En
cle. Always observe safe driving rules and driving |
laws, even if they contradict the unit instructions. |
En
