Basic Operation of XM Tuner
Selecting the Channel by Channel Number
When Channel Number Select mode is selected, you can select a desired Channel by Channel Number. (Refer to page 23.)
Initially, Channel Number Select mode is selected.
•Select a desired channel with the 2/3 button.
Note:
•Channels that cannot currently be selected are skipped, and the next Channel is selected.
•If you continue pressing the button for longer than 0.5 seconds, you can increase/decrease Channel Number by 10 to enable you to quickly jump to your desired Channel.
•You can also select a Channel from a desired Channel Category. (Refer to page 23.)
•Display changes as follows when you switch Channels or operate in other ways. Channel Number = Channel Name = Selected Display *
*For details, refer to “Switching the Display”.
•It may take a few seconds before you can hear anything wile this product acquires and processes the satellite signal when you switch power ON, change the Source to XM tuner, or select a Channel.
Channel Number |
| Preset Number Indicator | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Band
Preset Tuning | XM1 | = XM2 = XM3 |
|
•You can memorize Channels in buttons 1 through 6 for easy,
Preset Channel recall | 2 seconds or less |
Channel preset memory | 2 seconds or more |
|
|
Note:
•Memorize a Channel when you hear sound from that Channel.
•Memory/recall are for broadcasts. If you recall a memorized broadcast that has been moved to another Channel, the Channel to which the broadcast was moved is selected.
•Up to 18 XM channels (6 in XM1, XM2 and XM3) can be stored in memory.
•When Channel Number Select mode is selected, you can also use the 5 or ∞ buttons to recall broadcast stations memorized in buttons 1 through 6.
•If a Channel you have recalled cannot be selected, a message is displayed for 2 seconds and the unit returns to the operating status before the Channel was recalled.
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
10
