04Getting started
Chapter 4
Getting started
Switching on
After making sure that everything is connected properly and that the player is plugged in, push the POWER button into the ON position to switch the player on.
•Press on the remote to switch the unit into standby.
POWER OFF ON
POWER |
| |
|
| STANDBY |
OFF | ON | PURE AUDIO |
Playing discs
The basic playback controls for playing CDs, SACDs, and MP3/WMA discs are covered here. Further functions are detailed in Other playback features on page 13.
DIMMER OPEN/CLOSE
PURE AUDIO
1 2 3 CLEAR
4 5 6 ENTER
7 8 9 0
PROGRAM REPEAT RANDOM TIME
1If the player isn’t already on, press POWER to switch it on.
2Press (OPEN/CLOSE) to open the disc tray.
12
3 Load a disc.
Load a disc with the label side facing up, using the disc tray guide to align the disc. Once properly seated, press to close the disc tray.
4 Press (play) to start playback.
Basic playback controls
The table below shows the basic controls for playing discs.
Button What it does
Starts playback.
Pauses a disc that’s playing, or restarts a paused disc.
/(front Starts playback/stops a disc that’s panel only) playing.
• While depressing /, press (front panel only). Counting from the first track on the disc, playback will begin from the track number corresponding to the number of times is pressed.
Stops playback.
Press to start fast reverse scanning. Press (play) to resume normal playback.
Press to start fast forward scanning. Press (play) to resume normal playback.
Skips to the start of the current track, then to previous tracks.
En