Pioneer PD-F1009 manual Various Operations, Display, Clear

VARIOUS OPERATIONS

DISPLAY

2 3 Digit buttons

REPEAT MODE PROGRAM CLEAR

CLEAR

CLEAR

MODE 1

FILE–TYPE CD MECHANISM

ë SINGLE LOADER

ACCESS PLAY

1 2 3 DISC PUSH ENTER

4	5	6
7	8	9
	0
OPEN/		UNLOAD	6	7
CLOSE
4		DISC

MODE 1

Digitbuttons 2 3

DISC 4

1 2 3 DISPLAY

4 5 6

7 8 9

DISC 0 TRACK

– DISC +

1 Á 4 ¢

7 8 3 RANDOM

DISPLAY

DISC (–/+)

3

To program and play only the discs you want to hear (CUSTOM play)

This unit lets you program up to 300 of your favorite discs. For example, you can store all the discs of your favorite artist, or some other group of personal selections, and play only those discs.

You can even add other discs to the custom later on.

Also, there are 5 programmable custom files in which you can program any discs you like.

Operation example : Programming discs 3 and 12 in custom file 5

1	MODE		In the stop mode, press
			the MODE button several
			times to set the custom
	MODE		mode.
(		)
2	5		Select the custom num-
			ber with the digit buttons.
			DISC	TRACKMIN SEC

5

CUSTOM

( )

Light

• If some disc number appears, press CLEAR.

3		Select the disc number
		with the remote control
		unit’s digit buttons.
	3	DISC	TRACKMIN SEC
(		)
		CUSTOM

•The disc number can also be selected with DISC (–/+) or the main unit’s jog dial. In this case, because custom registration will function after approx. 2 seconds, step 4 is not necessary.

4	Press DISC.
	DISC
(	)
5	Repeat steps 3 and 4 to
	store other discs.

To start playback

1	2	3	Follow steps 1 and 2 then
4	5	6	press 3.
			Playback starts from the lowest
7	8	9	disc No.
	0

Checking the numbers of the stored discs.

After steps 1 and 2 , press DISPLAY 3 times.You should see a display like that shown below.

Press DISC(–/+). Each time you press DISC(–/+), a disc number stored in the CUSTOM file is displayed. When all the disc numbers have been displayed, the disc number changes to a blank. (To perform this operation on the main unit, turn the jog dial clockwise.)

DISC TRACK MIN SEC

CUSTOM

Pressing the front panel’s CLEAR button during the custom mode will cancel the displayed disc number from the custom file.

•When the jog dial is used during custom playback, only the discs stored in the custom file can be selected.

•If you use the digit buttons and DISC during CUSTOM playback to choose a disc not stored in the CUSTOM file, “NO DISC” will be displayed for approximately 3 seconds.

•When a disc appointed to the CUSTOM file is not loaded in the rack, “NO DISC” is displayed for approximately 3 seconds, the disc is erased from memory, and CUSTOM searches for the next disc.

•The discs stored in the CUSTOM file will not be erased when you turn off the power.

DISC TRACK MIN SEC

CUSTOM

12