VARIOUS OPERATIONS
REPEAT MODE PROGRAM CLEAR
1 | 2 | 3 | DISPLAY |
4 5 6
7 8 9
DISC 0 TRACK
– DISC +
1 Á 4 ¢
7 8 3 RANDOM
3
<Programming a pause (remote control only)>
(Pause program)
If you press 8 at step 4 , you can program a pause. When you press 8, “PA” appears in the display instead of the disc number.
•For example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8 to resume recording.
Notes!!
•You cannot program a pause as the first step, nor program two pauses in a row.
•When you program a pause, it counts as 1 step and reduces the total number of tracks you can program.
•To erase a program...
Press 7 twice during playback (or once in stop mode). You can also erase the program by pressing MODE, RANDOM, PREVIOUS, or SINGLE LOADER PL1AY in either play or stop mode (or by pressing BEST in stop mode).
•To cancel a program step
In stop mode, each time you press CLEAR, the last step in the program is erased.
•If a programmed disc is missing or inserted backwards during program play, “NO DISC” appears in the display, the step is automatically erased, and playback proceeds to the next step.
•Program contents are stored in memory even when the power is turned off.
•Press the DISPLAY twice to check the number of steps that have been programmed.
DISCTRACKMIN SEC
|
|
|
|
|
| This indicates the number of |
| PGM |
| programmed steps. | |||
|
|
|
Notes!!
• If step 5 is carried out before the accumulated time is displayed, the program play starts and the time is not displayed.
To scan quickly through tracks on a disc
• The operation is available only from the remote control unit.
This function plays a 10 second portion located 1 minute from the start of each track on all the discs in the current play mode.
<Disc scan> | Press |
either play or stop mode. | |
| • The unit plays a 10 second |
| portion located 1 minute into the |
| first track of each CD, starting |
Press once | from the first CD. |
| |
The ”DISC” and “SCAN” indicator blinks. |
<Track scan> Press
either play or stop mode. | ||
| ||
| • | The unit plays a 10 second |
|
| portion located 1 minute into |
|
| each track of each CD, starting |
Press twice |
| from the first CD. |
The “SCAN” indicator blinks. |
|
|
| ||
<Program scan> Press | ||
program mode. | ||
| • | The unit plays a 10 second |
portion located 1 minute into each track in the program.
<Best selection memory scan>
• | When UNLOAD is pressed while a program has been entered, |
| the disc for the 1st program step comes on the center position |
| and the hood opens. |
• | The display is not shown if the total time of the program is 100 |
Press
minutes or more. |
• | The unit plays a 10 second | |
Press once | portion located 1 minute into | |
The “SCAN” indicator blinks. | each track in the best selection | |
memory. | ||
|
<To return to normal playback>
3Press 3 (or 6) when you
reach the track you want to hear.
16 | • To cancel |