Pioneer PD-F957 specifications

VARIOUS OPERATIONS

To program tracks/discs in a desired order (PROGRAM play)

÷The remote control is the most convenient way to perform these operations.

÷You can program up to 36 steps.

÷ The parenthesis ( ) show operations for the main unit.

D

5 3 Press 3.

The program play starts from the track that was programmed first.

DISC TRACK MIN SEC

( 6 ) PGM

÷Items stored in memory are saved, even if the power cord is unplugged.

(Memory Back-Up Function).

POWER HI-LITE PREVIOUS BEST

23

2

REPEAT MODE PGM CLEAR

1	ABC	DEF	TIME/
	2	3	CHARA
GHI	JKL	MNO	TITLE
4	5	6	DISPLAY
PQRS	TUV	WXYZ	TITLE
7	8	9	INPUT
DISC	MARK	TRACK
SET	0	SET
< CURSOR >		– DISC +
1	¡	4	¢

78 3 RANDOM

FILE-TYPE CD PLAYER

REMOTE CONTROL UNIT Î

CU-P0089

1

3

5

The following operations can only be performed during normal play, HI-LITE scan or PREVIOUS scan

<Programming tracks during normal play>

(Direct program)

1.Press PGM (PROGRAM).

•Program mode is activated.

2.Press PGM (PROGRAM) during playback.

•The current track is programmed.

Operation example: Programming disc 2, track 7 as step 1, and disc 5, track 3 as step 2.

	1	PGM	Press PGM (PROGRAM) dur-
			ing stop mode.
	PROGRAM		)
	(
	2	2	Use the digit buttons to se-
			lect the disc, then press DISC
		«	SET.
			(Use DISC (–/+)to select the disc
		DISC
			number, then press PROGRAM.)
		SET
			DISC	TRACK	MIN	SEC
	DISC	PROGRAM		PGM
(	–	+ =	) The PGM indicator starts to blink.
	3	7	Use the digit buttons to se-
			lect the track, and press
		«	TRACK SET.
			(Use 41/¡¢ to select the
		TRACK	track number, then press PROGRAM.)
		SET	DISC	TRACK	MIN	SEC
				PGM
			DISC	TRACK	MIN	SEC
(		PROGRAM
	41 ¡¢ =		)	PGM

<Programming during normal playback (remote control only)>

(Preprogramming)

You can program during normal playback. (\Operation example 1 2 3 4 )

•The player changes to program play when the current track finishes playing back.

•To change to program mode directly, press 3.

The following operations can only be performed during stop mode

<Programming an entire disc as one step>

(Disc all program)

If you skip step 3 of the operation example, disc 2 is programmed as step 1.

<Programming a pause (remote control only)>

(Pause program)

If you press 8at step 4 , you can program a pause. When you press 8, “PA” appears in the display instead of the disc number.

÷For example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8to resume recording.

Notes!!

÷You cannot program a pause as the first step, or program two

pauses in a row.

÷When you program a pause, it counts as 1 step and reduces the

total number of tracks you can program.

÷ To erase a program...

Press 7twice during playback (or once in stop mode). You can also

erase the program by pressing MODE, RANDOM, PREVIOUS, or

SINGLE LOADER PLAY in either play or stop mode (or by

pressing BEST in stop mode).

÷ To cancel a program step

4 5	DISC
	SET

\

TRACK

3SET

\

Repeat steps 2 and 3 to pro- gram additional discs and tracks.

Once the track times have been added, the PGM indicator stops blink- ing and the following display appears (Total Time).

DISC TRACK MIN SEC

PGM

In stop mode, each time you press CLEAR, the last step in the
program is erased.
÷ If a programmed disc is missing or inserted backwards
during program play, “	NO DISC” appears in the display,
the step is automatically erased, and playback proceeds to the
next step.
÷ Program contents are stored in memory even when the power
is turned off (STANDBY).

Notes!!

÷	If step 5 is carried out before the accumulated time is displayed,
	the program play starts and the time is not displayed.
÷	When UNLOAD is pressed while a program has been entered, the
	disc for the 1st program step comes on the center position and the
	hood opens.

DISC	PROGRAM	PROGRAM	)
( –	+ =	= 41 ¡¢ =

÷ The display is not shown if the total time of the program is 100

minutes or more.

15

<PRB1273> En