Attaching the Pioneer Display and Television
| The weight of a Pioneer display and television is |
| about 30 kg (66 lbs), they have no depth, and are |
������� | unstable. Therefore, at least two people must |
assemble and install them. |
����
•Be sure to install it on a flat stable location.
•Insert the screws in the holes vertically and securely tighten.
•Place a sheet or other material under the display to prevent scratches or damage to it.
•After manually turning the screw lightly two or three times, tighten it with a
1Attaching the Pioneer display and
television to the stand.
Lay the Pioneer display and television down flat. Align the stand supports with the Pioneer display and television stand slots, and slowly insert the supports horizontally. Please ensure that the stand supports do not come into contact with anything other than the Pioneer display and television stand slots. Contact with any other area may result in scratching or deformation of the display's rear side or terminals.
����
2Securing the Pioneer display and television with Installation screws.
Secure the parts marked with the arrows (holes marked "T") using a Phillips screwdriver.
Upper | Installation screw ➁ (M8 × 40 mm: black) | |
Bottom | Installation screw ➃ (M8 × 15 mm: black) | |
| ||
|
| |
Upper | Installation screw ➂ (M8 × 23 mm: black) | |
Bottom | Installation screw ➃ (M8 × 15 mm: black) | |
���������������������� | ������������������� | |
������������������� | ��������������������� | |
|
| ��������������������� |
|
| ��������������������� |
����
�����
English
�����
����
When laying down the Pioneer display and television, be careful so as to not scratch or damage it.
13
En
