Pioneer PDK-TS33A, KRP-TS02 manual Preventing Equipment from Falling Over, Specifications, English

��

��������������

����������������������

Preventing Equipment from Falling Over

•After installing the stand, be sure to take special care to ensure that the equipment will not fall over.

•Secure the plasma television to both the rack and the wall surface.

Stabilizing on a rack etc.

Use screws (those available on the market) to fix the Pioneer display and television like shown in the diagram.

����	���� �����������
To stabilize the equipment on �����������������������������������
a table, use screws that have a
nominal diameter of 4 mm (5/32
inch) and that are at least 20 mm
(13/16 inch) long.	����������
	������������

�������

��������������������

�����������

������������������

��������������

���������������������������������������������

��������������������������������������������

������

Using a wall for stabilization

1Attaching falling prevention bolts (hooks) to the Pioneer display and television.

2Using strong cords to firmly stabilize it appropriately and firmly to a wall, pillar,

or other sturdy element.

Perform this work in the same way on the left and right sides.

����

Use hooks, cords, and fittings that are available on the market. Recommended hook:

Nominal diameter M8

Length 12 mm to 15 mm (1/2 inch to 5/8 inch)

�����

�����

�������

English

Specifications

External dimensions:

KRP-TS02	552 mm (W) × 323 mm (H) × 350 mm (D) (21-23/32 in. (W) × 12-23/32 in. (H) × 13-25/32 in. (D))
PDK-TS33	550 mm (W) × 402 mm (H) × 349 mm (D) (21-21/32 in. (W) × 15-13/16 in. (H) × 13-3/4 in. (D))
PDK-TS33A	552 mm (W) × 402 mm (H) × 350 mm (D) (21-23/32 in. (W) × 15-13/16 in. (H) × 13-25/32 in. (D))
Weight:
KRP-TS02	2.5 kg (5.6 lbs)
PDK-TS33	2.2 kg (4.9 lbs)
PDK-TS33A	2.7 kg (6.0 lbs)

• The above specifications and exterior may be modified without prior notice to improve the product.

15

En