Pioneer PDP-502MXE manual Screen size selection, Changing the screen size, Normal

English

Operations

Operations

Screen size selection

Changing the screen size

The size of the picture or the picture’s range projected on the screen can be changed between 4 screen sizes described in the table on this page.

Press SCREEN SIZE to select the size.

The screen size changes each time SCREEN SIZE on the remote control, or SIZE on the unit is pressed as follows.

For PC signals
	3 ORIGINAL		2	3 4:3 NORMAL
		ZOOM
				FULL 2

(For screen sizes when the video signal of a personal computer is input, please see Supplement 1 on page 26.)

1ORIGINAL

The input signal and the screen maintain a dot to line ratio of 1:1 and is thus highly faithful to the source.

A
	480 lines
		768 lines

640 dots

1280 dots

(Illustration shows 640 x 480 input.)

24:3 NORMAL

The display fills the screen as much as possible without altering the aspect ratio of the input signal.

A

16

Moving the screen position upward or downward

During personal computer input (1280 x 1024/60Hz only), when the ZOOM setting is selected, the position of the screen can be adjusted by using 5/°.

3FULL

The display is presented with a widescreen aspect ratio of 16:9 and fills the entire screen.

A

4ZOOM

The ZOOM setting is available only during personal computer input (1280 x 1024/60 Hz only).

The input signal and the screen maintain a dot to line ratio of 1:1. Display is highly faithful to the source. However, in order to maintain the 1:1 ratio, a portion of the display will not appear on the screen.

768 lines

1024 lines

Use 5/° to adjust the position of the video image on the screen.

<ARE1350> En