Pioneer PDP-502MXE Operating range of the remote control unit, Troubleshooting, General Problems

Models: PDP-502MXE

1 33
Download 33 pages 38.53 Kb
Page 27
Image 27

Operating range of the remote control unit

When operating the remote control unit, point it at the remote sensor (ë) located on the front panel of the main unit. The remote control unit is operable up to 23 feet (7 m) from the unit and within a 30 angle on each side of the sensor.

Additional Information

English

If you are having difficulty with operation of the remote control unit

¦ The remote control unit may not operate if there are objects

placed between it and the display.

 

¦ Operational distance will gradually become shorter as the

7 m (23 feet)

batteries begin to wear out, replace weak batteries with new

ones as soon as possible.

 

¦This unit discharges infrared rays from the screen. Placing a video deck or other component that is operated by an infrared remote control unit near this unit may hamper that component’s reception of the remote control’s signal, or prevent it from receiving the signal entirely. Should this occur,

move the component to a position further away from this unit.

CU-

 

SET

¦ Depending on the installation surroundings, this unit’s remote

V154

ë￿

 

control unit may be influenced by the infrared rays discharged

 

from the plasma display, hampering reception of its rays or

 

limiting its operational distance. The strength of infrared rays

 

discharged from the screen will differ according to the picture

 

displayed.

 

 

 

 

 

30˚

 

STANDBY/ON

VIDEO

SIZESCREEN

RGB 1

Y/C

MUTE

 

RGB 2

VOL

MENU

 

 

 

DISP

 

30˚

Remote Sensor

Troubleshooting

What may at first seem to be an malfunction, may be remedied with a quick check.

Please check to see if a warning is displayed on the screen. If displayed, refer to page 24 and check the mode. If there is no display check to see if the problem is listed below. The problem may also be caused by something other than this unit so please also check the other components being used such as a video deck. If the problem can still not be solved please consult the dealer where this unit was purchased.

General Problems

 

Problem

 

Possible Solution

 

 

 

• No power

Is the power cord disconnected? (page 12)

 

 

• Has the MAIN POWER switch been switched on? (page 7)

Unit cannot be operated.

External influences such as lightning, static electricity, etc., may cause improper operation. In this

 

 

 

case, operate the unit after first turning the main power on/off, or unplugging the power cord and

 

 

 

re-plugging it in after 1 to 2 minutes.

Remote control does not

Are batteries inserted with polarity (+, –) correctly aligned? (page 22)

 

operate.

Are batteries worn out? (Replace with new batteries).

 

 

Is the plug inserted in the CONTROL IN terminal? Because reception of the remote control’s

 

 

 

signal will not be possible if the plug is inserted, please check connections (page 11).

Picture is cut off.

Is the selected screen size correct? Switch to another screen size (page 16).

 

 

Are SCREEN mode adjustments such as picture size made correctly? (page 19).

Strange color, light color, or

Adjust the picture tone (page 18).

 

dark, or color misalignment

Is the room too bright? The picture may look dark in a room that is too bright.

Power is suddenly turned

The unit’s internal temperature has increased. (Air vents are blocked.)

 

off.

 

Remove any objects blocking vent or clean (page 22).

 

 

• Is the POWER SAVE mode set to “MODE1” or “MODE2”? (page 17)

No picture

Are all connections correct? (page 10)

 

 

Has setup been done correctly after connection? (page 13)

 

 

Is the correct input selected? (page 14)

 

 

Is a non-compatible signal being input? (page 26)

 

 

Is picture adjustment correct? (page 18)

23

Additional Information

<ARE1350> En

Page 27
Image 27
Pioneer PDP-502MXE manual Operating range of the remote control unit, Troubleshooting, General Problems

PDP-502MXE specifications

The Pioneer PDP-502MXE is a remarkable plasma display panel that garnered attention in the home entertainment market due to its superior image quality and exceptional design. Launched in the early 2000s, the PDP-502MXE was a leading model in Pioneer’s lineup of high-definition plasma televisions, showcasing cutting-edge technology that set new standards in the industry.

One of the standout features of the PDP-502MXE is its 50-inch screen, which makes it an ideal choice for home theaters and larger living spaces. The display boasts a native resolution of 1024x768 pixels, providing stunning image clarity and detail. The plasma technology employed in this model allows for deep blacks and vibrant colors, delivering a dynamic range that enhances movie-watching experiences and visual content.

The PDP-502MXE supports multiple aspect ratios and allows users to choose between 4:3 and 16:9, making it versatile for various types of media. It comes equipped with advanced video processing capabilities, ensuring that even lower-resolution signals are upscaled effectively, resulting in a smooth viewing experience. The inclusion of a range of inputs, such as HDMI and component video, makes it compatible with many external devices, including DVD players and gaming consoles.

Additionally, Pioneer integrated their proprietary technologies into the PDP-502MXE, such as the PureCinema technology, which improves motion handling by reducing blurriness during fast-moving scenes. The display also features a filter that minimizes reflections, allowing it to perform admirably in different lighting conditions.

The PDP-502MXE’s design is another highlight, featuring an ultra-slim profile that enhances its aesthetic appeal. The panel's industrial design is complemented by minimal bezels, making it a stylish addition to any home setup. The build quality of the PDP-502MXE reflects its premium positioning, ensuring durability alongside functionality.

In summary, the Pioneer PDP-502MXE is a powerful plasma display that combines impressive visual performance with sleek design. Its advancing technologies, compatibility with various media formats, and stylish aesthetics make it an enduring choice for enthusiasts of high-quality home entertainment systems. Although newer technologies have emerged since its release, the PDP-502MXE continues to be remembered for its significant contributions to the evolution of display technology.