Pioneer PDP-6100HD Rear View/ Terminal Board, EXT Speaker L and R, VIDEO1, 2, 3 BNC, RCA, S-Video

Rear View/ Terminal Board

English

AAC IN

Connect the included power cord here.

BEXT SPEAKER L and R

Connect speakers here. Maintain the correct polarity.

Connect the (positive) speaker wire to the EXT

SPEAKER terminal and the(negative) speaker wire

to theEXT SPEAKER terminal on both LEFT and RIGHT channels.

Please refer to your speaker’s owner’s manual.

CVIDEO1, 2, 3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc. here.

DAUDIO1, AUDIO2, AUDIO3 These are audio input terminals.

The input is selectable. Set which video image to allot them from the SOUND menu screen.

ECOMPONENT 1

Connect DVD’s, High Definition or Laser Discs, etc. here.

FPC2/ COMPONENT2

PC2:	You can connect an analog RGB
	signal and the syncronization signal.

COMPONENT2: You can connect DVDs, High Definition sources, Laser Discs, etc. here.

This input can be set for use with an RGB or component source (see page 19).

GPC1 (D-Sub)

Connect an analog RGB signal from a computer, etc. here.

HHDMI

Connect a digital signal from a source with a HDMI output.

See page 30 for the details of Supported Signals.

IRS-232C

Never connect any component to this connector without first consulting your Pioneer installation technician.

This connector is used for plasma display setup adjustments.

Part Names and Function

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

5

En