Pioneer PDP-6100HD manual  Screen Wiper

English

OSD (On Screen Display) Controls

24

Information

When set to AUTO

Set automatically, as described below.

ABL: 100

ORBITER: AUTO1

INVERSE/WHITE: OFF

SCREEN WIPER: OFF

SOFT FOCUS: OFF

OSD ORBITER: ON

OSD CONTRAST: LOW

ABL (Auto Brightness Limiter)

Use this to activate the brightness limiter.

Example: Setting “ABL” to “75”

On “ABL” of “LONG LIFE” menu, select “75”.

LONG LIFE

ABL		: 75
ORBITER		: OFF
INVERSE/WHITE		: OFF
SCREEN WIPER		: OFF
SOFT FOCUS		: OFF
OSD ORBITER		: ON
OSD CONTRAST		: LOW
SEL.	ADJ.	EXIT RETURN

Information

ABL settings

100:The brightness of the screen is adjusted automatically to suit the picture quality.

75, 50, 25: Sets maximum brightness.

The brightness level decreases in the order of 75, 50, 25. 25 provides minimum brightness.

* These values are approximate.

ORBITER

Use this to set the picture shift.

Example: Setting “ORBITER” to “AUTO1”

On “ORBITER” of “LONG LIFE” menu, select “AUTO1”.

LONG LIFE

ABL		: 100
ORBITER		: AUTO1
INVERSE/WHITE		: OFF
SCREEN WIPER		: OFF
SOFT FOCUS		: OFF
OSD ORBITER		: ON
OSD CONTRAST		: LOW
SEL.	ADJ.	EXIT RETURN

Information

ORBITER settings

OFF: Orbiter mode does not function.

This is the default setting when PC signal is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a COMPONENT signal is input. Set to “OFF” when these signals are not used. AUTO2: The picture moves around the screen intermittently, making the picture bigger.

*When a Video or a COMPONENT signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger.

INVERSE/WHITE

Use this to set the inverse mode or to display a white screen.

Example: Setting “INVERSE/WHITE” to “WHITE”

On “INVERSE/WHITE” of “LONG LIFE” menu, select “WHITE”.

LONG LIFE

ABL		: 100
ORBITER		: OFF
INVERSE/WHITE		: WHITE
SCREEN WIPER		: OFF
SOFT FOCUS		: OFF
OSD ORBITER		: ON
OSD CONTRAST		: LOW
SEL.	ADJ.	EXIT RETURN

Information

INVERSE/WHITE Settings

OFF: Inverse/white mode does not function.

INVERSE: The picture is displayed alternately between positive image and negative image.

WHITE: The entire screen turns white.

SCREEN WIPER

When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.

Example: Setting “SCREEN WIPER” to “ON”

On “SCREEN WIPER” of “LONG LIFE” menu, select “ON”.

LONG LIFE

ABL		: 100
ORBITER		: OFF
INVERSE/WHITE		: OFF
SCREEN WIPER		: ON
SOFT FOCUS		: OFF
OSD ORBITER		: ON
OSD CONTRAST		: LOW
SEL.	ADJ.	EXIT RETURN

Information

SCREEN WIPER

ON: The white vertical bar appears.

OFF: Screen wiper mode does not function.

SOFT FOCUS

Reduces edges and softens the image.

Example: Setting “SOFT FOCUS” to “LEVEL2”

On “SOFT FOCUS” of “LONG LIFE” menu, select “LEVEL2”.

LONG LIFE

ABL		: 100
ORBITER		: OFF
INVERSE/WHITE		: OFF
SCREEN WIPER		: OFF
SOFT FOCUS		: LEVEL2
OSD ORBITER		: ON
OSD CONTRAST		: LOW
SEL.	ADJ.	EXIT RETURN

Information

SOFT FOCUS settings

OFF: Turns the SOFT FOCUS function off.

LEVEL1, 2, 3, 4: Activates the SOFT FOCUS setting. The higher numbers create a softer image. “SHARPNESS” can not be adjusted on the “PICTURE” menu.

En