③Catch the hooks on the top of the speakers to the partially tightened screws, then line up the holes in the hooks on the bottom of the speakers with the screw holes on the bottom of the display and partially tighten the included screws (M4) in them.
Screws (M4)
④Fully tighten the four partially tightened screws.
*Push the speaker against the display while driving the screw.
WARNING
●When the speakers are installed on the display, do not move the unit by lifting up the speakers. The display could fall and cause injury.
Connecting the cords
Turn off the power of all connected units before connecting the cords.
Connect the display’s EXT SPEAKER R and L
terminals with the speakers’ terminals using the
included connection cords.
R
L
Cord Clamper
Peel off the protective tape from the back of the clamper, then mount the clamper in the desired position and clamp the cords together.
There is polarity ＋ － with the conductor of each
connection cord.
Connect each conductor to the correct terminal.
Black
Red
While holding the button of each speaker terminal, insert a conductor of the connection cord.
